PDF檔-POM GGTU5F1A-D9M WT TDS-2024 NEW
| GGTUTYPE | |||
| 剛性強化、耐熱，抗UV耐候，外觀佳，平整低翹曲，耐衝提高，低噪音，耐磨，白色 | |||
| Strengthened rigidity, heat resistance, UV and weather resistance, good appearance, flat and low warpage, improved impact resistance, low noise, wear resistance, white | |||
| 樹酯Resin | POM Polyacetal | ||
| 規格Grade | GGTU5F1A-D9M WT | ||
| 來源source | 上禾伸企業 | ||
| 描述Description | |||
| ■13%GF/GB剛性強化、耐熱提升、耐磨佳。
13%GF/GB has enhanced rigidity, improved heat resistance and good wear resistance. |
|||
| ■抗UV耐候級，可使用於戶外產品，延緩顏色變色，提高產品使用壽命。
Anti-UV and weather-resistant grade, can be used in outdoor products to delay color discoloration and extend product service life. |
|||
| ■低配向性，降低翹曲性，平整性佳良好，外觀佳。
Low orientation, reduced warpage, good flatness and good appearance. |
|||
| ■尺寸收縮率降低，改善產品表面凹陷程度。
The dimensional shrinkage rate is reduced and the surface depression of the product is improved. |
|||
| ■增韌提高耐衝性、耐寒性，低噪音。
Toughening improves impact resistance, cold resistance and low noise.. |
|||
| ■優異的耐油性及耐化學性。
Excellent oil and chemical resistance. |
|||
| ■相較於其他工程塑膠有較佳之自潤性及低磨耗特性。
Compared with other engineering plastics, it has better self-lubricating and low wear characteristics. |
|||
| 成型模式
Forming mode |
射出成型
Injection Molding |
||