PDF檔-PA12 FC16-A3 BK TDS導電、超高剛性強化級
| FCTYPE | ||||
| 導電、超高剛性強化級
Conductive, ultra-high rigidity reinforced grade |
||||
| 樹酯Resin | PA12 Polyamide12 | |||
| 規格Grade | FC16-A3 BK | |||
| 來源source | 上禾伸企業 | |||
| 描述Description | ||||
| Nylon 12 (Polyamide 12, 尼龍 12)，為熱可塑性半結晶型塑膠。與其他熱可塑性塑膠相比，在強度、延展性、耐磨性及耐熱性上提供了卓越的平衡，並有很好的流動性及寬廣的加工成型範圍，使其成為最普遍被使用的工程塑膠之一。
Nylon 12 的吸濕性低於 Nylon 6/6、Nylon 6、Nylon 6/10，使其不同的環境濕度下可維持良好的尺寸安定性，並在低溫環境有卓越的韌性及耐衝擊性。 其他優點如耐化學性佳、低比重、高改質複合性。 Nylon 12 (Polyamide 12, Nylon 12) is a thermoplastic semi-crystalline plastic. Compared with other thermoplastic plastics, it provides an excellent balance of strength, ductility, wear resistance and heat resistance, and has good fluidity and a wide range of processing and molding, making it the most commonly used engineering One of the plastics. The hygroscopicity of Nylon 12 is lower than that of Nylon 6/6, Nylon 6 and Nylon 6/10, so that it can maintain good dimensional stability under different environmental humidity, and has excellent toughness and impact resistance in low temperature environment. Other advantages such as good chemical resistance, low specific gravity, high modified composite.
|
||||
| ■碳纖維添加30%，剛性、耐熱強化、導電、耐磨。
Carbon fiber added 30%, rigid, heat-resistant, conductive and wear-resistant. |
||||
| 成型模式
Forming mode |
射出成型
Injection Molding |
|||