PDF檔TPEE flim 7W11040D TDS
| 7W11040DTYPE | |
| 熱塑性聚脂彈性體TPEE薄膜、薄板
Thermoplastic polyester elastomer TPEE film and sheet |
|
| 產品product | TPEE膜 Thermoplastic Polyester Elastomer flim |
| 規格Grade | 7W11040D |
| 來源source | 上禾伸企業 |
| 硬度hardness
Shore D/A |
40/85 |
| 厚度mm | 0.3~1.5 |
| 表面surface | 單面啞光Single side matte |
| 描述Description | |
| ■寬廣的環境溫度範圍應用區間 -40~120℃，耐低溫特性，低溫脆化溫度最低可達 -60℃以上。耐熱性佳，熱熔溫度可達到170℃以上
Wide ambient temperature range, application range -40~120℃, low temperature resistance, low temperature embrittlement temperature as low as -60℃ or above. Good heat resistance, hot melt temperature can reach above 170℃ |
|
| ■優異的反撥彈性、彈性恢復力，與良好的抗撕裂性。
Excellent kickback elasticity, elastic recovery, and good tear resistance. |
|
| ■耐油及耐化學性佳。對於柴油、標準燃油、潤滑油、絕緣油、及醋酸、檸檬酸、乳酸、硫酸、氫氧化鈉、氨水、甲醇、乙醇、異丙醇、甲苯、n- 乙烷、異辛烷、塩溶液，酚溶液…等，有良好抵抗性。
Good oil and chemical resistance. For diesel, standard fuel, lubricating oil, insulating oil, and acetic acid, citric acid, lactic acid, sulfuric acid, sodium hydroxide, ammonia, methanol, ethanol, isopropyl alcohol, toluene, n-ethane, isooctane, and chlorine solution, Phenol solution…etc., has good resistance. |
|
| ■長期壓縮變形率低，抗撕裂佳，具抗氧、臭氧及耐老化之特性。
It has low long-term compression deformation rate, good tear resistance, and has the properties of resistance to oxygen, ozone and aging. |
|
| ■符合FDA 及 NSF 規範。
Compliant with FDA and NSF specifications. |
|