PDF檔-芳香族PAMXD6 HD低吸濕系列簡介
| HDTYPE | ||||||||
| PAMXD6剛性高強化，高耐熱，低吸濕、尺寸安定系列
PAMXD6 series with high rigidity, high heat resistance, low moisture absorption and stable dimensions |
||||||||
| 樹酯Resin | 芳香族PA MXD6 Aromatic Polyamide MXD6 | |||||||
| 規格Grade | HDG16-A1 | HDG1X-A1 | HDG1X2-A1 | HDGT5X-A2 | HDC16-A3
/HDC18-A3 |
|||
| 來源source | 上禾伸企業 | |||||||
| 描述Description | ||||||||
| ■芳香族尼龍PA MXD6複合，高剛性高耐熱強化，低吸濕，尺寸安定。HEG系列規格高度填充GF玻纖30/50/60%，也能維持產品最佳表面。應用於汽車相關零件與電子、電器產品非常合適。
Aromatic nylon PA MXD6 composite, high rigidity and heat resistance reinforcement, low moisture absorption, and dimensional stability. HEG series specifications are highly filled with GF glass fiber 30/50/60%, which can also maintain the best surface of the product. It is very suitable for use in automobile-related parts and electronic and electrical products. |
||||||||
| ■HDGT5X -A2規格，填充50%GF玻纖/礦物粉MD，強調低吸濕、低翹曲，尺寸安定。
HDGT5X -A2 specifications, 50% GF glass fiber/mineral powder MD, emphasizing low moisture absorption, low warpage, and stable dimensions. |
||||||||
| ■HDC系列規格填充CF碳纖30/40%，高剛性高耐熱，低吸濕、尺寸安定，導電、靜電消散，阻抗達101~4。可以使用於導電、靜電消散需求產品上。
HDC series specifications are filled with 30/40% CF carbon fiber, high rigidity and heat resistance, low moisture absorption, dimensional stability, conductive, static electricity dissipation, and impedance up to 101~4. |
||||||||
| ■塑料吸濕飽和後，抗張強度與彎曲強度變化性比較低。
After the plastic is saturated with moisture, the variability of its tensile strength and flexural strength is relatively low. |
||||||||
| ■優異的機械性能和熱性能、線膨脹係數小、適於精密製品的加工及金屬替代材料。加上比重比金屬輕、易於成型、高設計自由度。
Excellent mechanical properties and thermal properties, small linear expansion coefficient, suitable for processing precision products and metal replacement materials. In addition, its specific gravity is lighter than metal, easy to form, and has high design freedom. |
||||||||
| ■耐化學性佳，對脂、油、燃料、液壓油、鹽溶液具良好的耐受性。
Good chemical resistance, good tolerance to grease, oil, fuel, hydraulic oil, salt solution. |
||||||||
| ■良好的抗低溫性、低溫時保持穩定的物性，常溫抗衝擊性佳。
Good low temperature resistance, stable physical properties at low temperatures, and good impact resistance at room temperature. |
||||||||
| 成型模式
Forming mode |
射出成型
Injection Molding |
|||||||