PDF檔-PA6 DGRU561A-N6 BK TDS
| DGRUTYPE | |||
| 常溫耐衝擊佳、高耐寒低溫，剛性強化、耐熱強化，低浮纖良表面，低尺寸收縮，抗UV耐候戶外用，深黑色級
Good impact resistance at normal temperature, high cold and low temperature resistance, enhanced rigidity and heat resistance, low floating fiber and good surface, low dimensional shrinkage, UV and weather resistance for outdoor use, deep black grade |
|||
| 樹酯Resin | PA6 Polyamide6 | ||
| 規格Grade | DGRU561A-N6 BK | ||
| 來源source | 上禾伸企業 | ||
| 描述Description | |||
| ■優良的耐低溫特性，可耐寒-40℃，與常溫耐耐衝擊性。
Excellent low temperature resistance, can withstand cold -40℃, and has the same impact resistance at normal temperature. |
|||
| ■添加30%無機性玻璃纖維，剛性強化、耐熱強化。使用低浮纖配方，使產品外觀穩定，降低塑料複合量多玻纖時，容易造成的產品外觀浮纖現象。
Add 30% inorganic glass fiber to strengthen rigidity and heat resistance. The use of low floating fiber formula makes the appearance of the product stable and reduces the floating fiber phenomenon that is easily caused when the plastic compound amount is too much glass fiber. |
|||
| ■添加複合配方之抗UV劑、抗氧化劑、光線吸收劑(光安定劑)，可保護尼龍塑料產品使用於戶外，抵抗熱溫度、UV光線、空氣的破壞分子鏈、結構，延長產品使用之壽命。
Adding a compound formula of anti-UV agents, antioxidants, and light absorbers (light stabilizers) can protect nylon plastic products when used outdoors, resist damage to molecular chains and structures by heat, UV light, and air, and extend the life of the product. |
|||
| ■尺寸安定，收縮率低。耐化學性、耐油性佳。
Stable size and low shrinkage. Good chemical resistance and oil resistance. |
|||
| ■耐磨耗，耐刮擦，表面平滑。耐彎曲、反撥彈性佳。
Wear-resistant, scratch-resistant, smooth surface. Bending resistance, good rebound elasticity. |
|||
| ■成型容易、快速，脫模週期短。
Forming is easy and fast, and the demolding cycle is short. |
|||
| 用途Use：
運動器材:雪靴、溜冰鞋、直排輪、自行車零配件。 Sports equipment: snow boots, roller skates, inline rollers, bicycle spare parts. 保護安全用品:護目鏡架，護膝、護肘、護襠。 Protective safety supplies: goggle holder, knee pads, elbow pads, crotch pads. 傢俱用品零件:椅腳、椅輪、減震用品。 Furniture parts: chair legs, chair wheels, shock absorbers. 電動工具、五金用品、機械零配件，嬰兒車用品、動態零件。 Power tools, hardware supplies, mechanical spare parts, baby carriage supplies, dynamic parts. |
|||
| 成型模式
Forming mode |
射出成型
Injection Molding |
||