PDF檔-TPU 1WSCU1895A-B5 TDS
| 1WSCU18TYPE | |||
| 聚酯類，低週期性、快速結晶，抗UV耐候級
Polyester, low periodicity, rapid crystallization, UV and weather resistance grade |
|||
| 樹酯Resin | TPU 聚酯類Thermoplastic Polyurethane polyester | ||
| 規格Grade | 1WSCU1895A-B5 | ||
| 來源source | 上禾伸企業 | ||
| 描述Description | |||
| ■減短生產週期，快速結晶，縮短脫模時間，可減少30%脫模時間以上，增加生產效率。
Shorten the production cycle, crystallize quickly and shorten the demoulding time, which can reduce the demoulding time by more than 30% and increase production efficiency. |
|||
| ■抗UV級，可使用於戶外或是陽光強烈照射的，使產品使用時間延長。
Anti-UV grade, can be used outdoors or under strong sunlight, extending the use time of the product. |
|||
| ■抗張強度及斷裂延伸率大，優秀彎曲強度。
High tensile strength and elongation at break, excellent flexural strength. |
|||
| ■可耐低溫-35~-50℃
Can withstand low temperature -35~-50℃ |
|||
| ■耐油、耐潤滑油及耐脂肪族碳氫有機溶劑。
Oil resistance, lubricating oil resistance and aliphatic hydrocarbon organic solvent resistance. |
|||
| ■具抗氧、臭氧及耐老化之特性。
With anti-oxidation, ozone and anti-aging properties. |
|||
| ■可和PC、PC/ABS雙次射出黏合。
It can be bonded with PC and PC/ABS by double injection. |
|||
| ■是綠色環保塑料，對環境非常友善，可短期內，在自然環中分解，低汙染。
It is a green and environmentally friendly plastic, which is very friendly to the environment. It can be decomposed in the natural environment in a short period of time and has low pollution. |
|||
| 應用application | |||
| 墊片、軸襯、膠皮、薄膜、管件、電線電纜、運動鞋底、衣服與裝備零件、飾品件扣具零件、運動器材以及機械零件等。
Gaskets, bushings, rubber, films, pipe fittings, wires and cables, sports shoe soles, clothing and equipment parts, jewelry fastener parts, sports equipment and mechanical parts, etc. |
|||
| 成型模式
Forming mode |
射出成型
Injection Molding |
TPU 1WSCU1895A-B5 TDS | |