| BWTYPE | ||||
| PC/TPEE合金，具高彈性與抗曲折彎曲、高耐衝擊性，低溫下動態使用保持穩定性能，耐油、耐溶劑，潤滑耐磨。 | ||||
| PC/TPEE alloy has high elasticity and resistance to bending and flexing, high impact resistance, maintains stable performance under dynamic use at low temperatures, and is resistant to oil and solvents, lubrication and wear. | ||||
|
|
||||
| 樹酯Resin | PC/TPEE PC/TPEE alloy | |||
|
|
||||
| 規格Grade | BW77-A1
<請點閱物性TDS檔-PC-TPEE BW77-A1 TDS-2026NEW> |
|||
|
|
||||
| 來源Source | 上禾伸企業 SHANG HE SHEN ENTERPRISE CO., Ltd. | |||
|
|
||||
| 描述Description | ||||
| PC/TPEE合金，它結合了PC塑料的高強度、剛性與耐熱性，以及TPEE塑料的優異彈性、低溫韌性與耐衝擊性，能改善傳統PC塑料耐寒性差及缺口敏感的缺點。
PC/TPEE alloy combines the high strength, rigidity, and heat resistance of PC plastic with the excellent elasticity, low-temperature toughness, and impact resistance of TPEE plastic, thus improving the shortcomings of traditional PC plastic such as poor cold resistance and notch sensitivity. |
||||
| ■耐疲勞與抗變形，改善單一PC塑料容易應力開裂的弱點，具備良好的動態抗反覆彎折與耐蠕變表現。
It exhibits fatigue resistance and deformation resistance, improving upon the weakness of single PC plastics being prone to stress cracking, and possesses excellent dynamic resistance to repeated bending and creep resistance. |
||||
| ■高剛性與韌性平衡，結合PC塑料的剛度與彈性體的抗衝擊能力，在低溫環境下仍能維持極佳的韌性。
It balances high rigidity and toughness, combining the rigidity of PC plastic with the impact resistance of elastomers, and can maintain excellent toughness even at low temperatures. |
||||
| ■可耐摔、抗震動疲勞性佳，可承受動態負載，提高PC塑料的耐磨性，抗化學性增強，對油性、碳氫化合物有明顯抵抗性。
It is drop-resistant, has good vibration fatigue resistance, can withstand dynamic loads, improves the wear resistance of PC plastic, enhances chemical resistance, and has significant resistance to oils and hydrocarbons. |
||||
| ■加工性佳，提升熔融Mi流動性，便於注塑成型複雜結構零件。
It has excellent processability, improves the fluidity of molten Mi, and facilitates injection molding of complex structural parts. |
||||
| 應用Application | ||||
| 電子電器：耐衝擊的結構外殼與活動卡扣。
Electronic and electrical appliances: impact-resistant structural housing and movable clips. |
||||
| 汽車工業：用於需要耐撞擊、耐低溫及結構強度的內外裝扣件或保險桿組件。
Automotive industry: Used for interior and exterior fasteners or bumper assemblies that require impact resistance, low-temperature resistance, and structural strength. |
||||
| 工業零件：需承受反覆彎曲疲勞與機械應力的傳動或彈性組件。
Industrial parts: Transmission or elastic components that need to withstand repeated bending fatigue and mechanical stress. |
||||
| 成型模式
Forming mode |
射出成型
Injection Molding |
|||