PDF檔-PA6 DGTUR551D-N6E BK TDS-2024 NEW
| DGTURTYPE | |||
| 高剛性、耐熱、耐低溫耐寒，抗UV耐候，低浮纖，良外觀，低翹曲，極性塑料可電鍍噴漆加工等級塑料 | |||
| High rigidity, heat resistance, low temperature resistance, cold resistance, UV and weather resistance, low floating fiber, good appearance, low warpage, polar plastic, electroplating and painting processing grade plastic | |||
| 樹酯Resin | PA6 Polyamide6 | ||
| 規格Grade | DGTUR551D-N6E BK | ||
| 來源source | 上禾伸企業 | ||
| 描述Description | |||
| ■優良的耐低溫特性，可耐寒-40℃。
Excellent low temperature resistance, can withstand cold -40℃. |
|||
| ■添加30%無機性玻璃纖維/MD礦物粉，剛性強化、耐熱強化。使用低浮纖配方，使產品外觀穩定，降低塑料複合量多玻纖時，容易造成的產品外觀浮纖現象。
Add 30% inorganic glass fiber/MD mineral powder to strengthen rigidity and heat resistance. The low floating fiber formula is used to stabilize the appearance of the product and reduce the floating fiber phenomenon that is easily caused when the plastic compound amount is too much glass fiber. |
|||
| ■添加複合配方之抗UV劑、抗氧化劑、光線吸收劑(光安定劑)，可保護尼龍塑料產品使用於戶外，抵抗熱溫度、UV光線、空氣的破壞分子鏈、結構，延長產品使用之壽命。
Adding a compound formula of anti-UV agents, antioxidants, and light absorbers (light stabilizers) can protect nylon plastic products when used outdoors, resist damage to molecular chains and structures by heat, UV light, and air, and extend the life of the product. |
|||
| ■Mi流動提升、低翹曲、外觀改善，低浮纖，易脫模。極性塑料可電鍍噴漆加工。
Mi improves flow, low warpage, improved appearance, low floating fibers, and easy demolding. |
|||
| ■尺寸安定，收縮率低。耐化學性、耐油性佳。
Stable size and low shrinkage. Good chemical resistance and oil resistance. |
|||
| ■極性塑料可電鍍噴漆加工。優秀的耐藥品、耐油脂及耐化學品特性。
Polar plastics can be electroplated and painted. Excellent resistance to chemicals, grease and chemicals. |
|||
| ■剛性佳，良好的機械性能。耐磨、耐刮性佳。
Good rigidity and good mechanical properties. Good wear resistance and scratch resistance. |
|||
| 成型模式
Forming mode |
射出成型
Injection Molding |
||