| 1WSO1990ATYPE | ||||
| 矽氧烷改質複合，改善表面滑順，提高耐磨性、耐刮擦性，幫助流動性，改善脫模性，提高加工效率 | ||||
| The addition of siloxane-modified composites improves surface smoothness, enhances wear resistance and scratch resistance, improves flowability, improves mold release properties, and increases processing efficiency | ||||
|
|
||||
| 樹酯Resin | TPU 聚酯類Thermoplastic Polyurethane polyester | |||
|
|
||||
| 規格Grade | 1WSO1990A-P1
<請點閱物性TDS檔-TPU 1WSO1990A-P1 TDS-2026NEW> |
|||
|
|
||||
| 來源source | 上禾伸企業 SHANG HE SHEN ENTERPRISE CO., Ltd. | |||
|
|
||||
| 描述Description | ||||
| ■添加矽氧烷後，優化手感，TPU塑料表面賦予滑順、乾爽的觸感，且降低摩擦係數，表面更滑順，增強耐磨抗刮，提高製品的耐磨耗能力與耐刮擦表現，進而改善TPU塑料容易發黏或摩擦力過大的問題。
The addition of siloxane optimizes the feel, giving the TPU plastic surface a smooth and dry touch, while reducing the coefficient of friction, making the surface smoother, enhancing wear and scratch resistance, and improving the wear resistance and scratch resistance of the product. This also improves the problem of TPU plastic being sticky or having excessive friction. |
||||
| ■降低黏度，改善加工流動性，改善脫模性，提高加工效率。
It reduces viscosity, improves processing fluidity, enhances mold release properties, and increases processing efficiency. |
||||
| ■抗張強度及斷裂延伸率大，優秀彎曲強度與反撥彈性。
It has high tensile strength and elongation at break, as well as excellent flexural strength and repulsive elasticity. |
||||
| ■可耐低溫-35~-50℃，非常適合在低溫環境使用。
It can withstand temperatures as low as -35 to -50°C, making it ideal for use in low-temperature environments. |
||||
| ■耐油、耐潤滑油及耐脂肪族碳氫有機溶劑，且具抗氧、臭氧及耐老化之特性。
It is resistant to oil, lubricating oil, and aliphatic hydrocarbon organic solvents, and also has the properties of resisting oxidation, ozone, and aging. |
||||
| ■可和PC、PC/ABS雙次射出黏合。
It can be bonded with PC and PC/ABS by double injection. |
||||
| ■是綠色環保塑料，對環境非常友善，可短期內，在自然環中分解，低汙染。
It is a green and environmentally friendly plastic, which is very friendly to the environment. It can be decomposed in the natural environment in a short period of time and has low pollution. |
||||
| 應用application | ||||
| 墊片、軸襯、膠皮、薄膜、管件、電線電纜、運動鞋底、衣服與裝備零件、飾品件扣具零件、運動器材以及機械零件等。
Gaskets, bushings, rubber, films, pipe fittings, wires and cables, sports shoe soles, clothing and equipment parts, jewelry fastener parts, sports equipment and mechanical parts, etc. |
||||
| 成型模式
Forming mode |
射出成型
Injection Molding |
|||